balcony railing design

Introduction

Generally speaking, the balcony should be at least 4 feet (depth) by 9 feet (length), so ideally you have enough space for a small table and the ability to maneuver.

Which balcony railing is the best?

Steel is perhaps the most versatile material, which is why it is also the most used for balcony railings, especially for large complexes with many units. It is stronger than aluminum, although it weighs more.

Which is better for the railing?

Steel is often the material of choice for railing systems because it has greater strength and hardness than aluminum. Aesthetically speaking, steel offers undeniable advantages: over time, the protective layer of aluminum oxidation becomes white and sometimes pitted.

What is the standard height of a balcony railing?

Protecting residential decks and balconies requires a height of between 36 and 42 inches, depending on the height of the surface above ground level. The required height for the railings is between 34 and 38 inches, measured above the bosses of the finished stair tread.

What are the different types of railings?

Post your Requirement
Steel Railing. One of the most used materials; Steel railings are not widely used for balcony railing systems. .
Wooden railing. Often chosen as a balcony railing, wood is the most commonly used material when it comes to choosing a railing design. .
Glass railing. .
Aluminum railings. .
Cast iron.

Is the 42 inch railing too high?

In general industry, OSHA standards state that the ramp height should be 42 inches. Simple! But in the construction industry, OSHA says the correct answer is 42? plus or minus 3?.

Is the PVC railing resistant?

Although not as heavy as wrought iron or steel, vinyl is surprisingly strong and durable. In fact, its about five times stronger than wood! Plus, unlike wood, you wont have to worry about rusting, rotting, blistering, rotting, peeling, or being preyed upon by pests.

What is the cheapest balustrade?

Wood and vinyl railings are the least expensive, starting at $15 to $20 per linear foot; glass railings are the most expensive, up to $850 per linear foot.

What is the right height for a guardrail?

Current ADA standards state that the top of handrail gripping surfaces must be a minimum of 34 inches and a maximum of 38 inches measured vertically above walking surfaces, stair edges, and access ramps with a slope greater than .

Which balustrade is iron or expensive steel?

Wrought iron railings are much more expensive than other options like wooden railings, glass railings, steel railings.

Conclusion

By definition, a rail is an integral part of a guardrail. But there is also a definition which implies that rail can also be used to refer to guardrail. They are used interchangeably in the given context.